Análisis del proceso de solidificación en fundiciones grafíticas esferoidales

P. Larrañaga; J. Sertucha; R. Suárez

doi:10.3989/revmetalm.2006.v42.i4.24

Analysis of the solidification process of ductile iron

Authors

P. Larrañaga Ingeniería y Procesos de Fundición. Centro de Investigación Metalúrgica AZTERLAN.
J. Sertucha Ingeniería y Procesos de Fundición. Centro de Investigación Metalúrgica AZTERLAN.
R. Suárez Ingeniería y Procesos de Fundición. Centro de Investigación Metalúrgica AZTERLAN.

DOI:

https://doi.org/10.3989/revmetalm.2006.v42.i4.24

Keywords:

Graphite-austenite solidification, Ductile iron, Contraction defects, Thermal analysis

Abstract

The interest about all the physical and chemical phenomena related with ductile iron solidification processes have increased due to the casting requirements of free-porosity. In the present work two main ductile iron chemical compositions, currently used in ordinary industry lines, have been selected in order to analyse their solidification patterns under similar conditions by means of quenching tests. In addition, the influence of metal inoculation on eutectic transformation processes is studied. Taking the obtained results into account, different solidification models are established for each transformation type found in this work, attending mainly to the possibility of contraction defect appearances.

Downloads

Download data is not yet available.

References

[1] T. Skaland Y O. Grong, AFS Trans. 56 (1991) 153-157.

[2] S. Chang, D. Shangguan Y D. M. Stefanescu, AFS Trans. 99 (1991) 531-541.

[3] R. Ruxanda, L. Beltrán-Sánchez, J. Massone Y D. M. Stefanescu, AFS Trans. 01-066 (2001) 1- 12.

[4] C. Labrecque Y M. Gagné, AFS Trans. 72 (1998) 83-90.

[5] R. E. Ruxanda, D. M. Stefanescu Y T. S. Piwonka, AFS Trans. 02-177 (2002) 1-17.

[6] R. Fuoco Y C. S. Cabezas, AFS Trans. 04-126 (2004) 1-20.

[7] P. Zhu Y R. W. Smith, AFS Trans. 52 (1995) 601-609.

[8] A. Diószegi Y I. Svensson, Int. J. Cast Met. Res. 18 (2005) 41-46. doi:10.1179/136404605225022829

[9] H. Zhao Y B. Liu, Int. J. Cast Met. Res. 16 (2003) 281-286.

[10] R. Suárez, Proc. 1st Symposium Azterlan and the Foundry Sector, CD-Rom, Bilbao, España, 2002.

[11] F. Mampaey, AFS Trans. 27 (2000) 11-17.

[12] Manual de utilización del sistema de Análisis Térmico Thermolan. Azterlan.

[13] A. Javaid Y C. R. Loper, JR, AFS Trans. 49 (1995) 135-150.

[14] H. Santos Y C. Sá, Int. J. Cast Met. Res. 17 (2004) 319-320. doi:10.1179/136404604225020623

Downloads

Published

2006-08-30

How to Cite

Larrañaga, P., Sertucha, J., & Suárez, R. (2006). Analysis of the solidification process of ductile iron. Revista De Metalurgia, 42(4), 244–255. https://doi.org/10.3989/revmetalm.2006.v42.i4.24

Download Citation

Issue

Vol. 42 No. 4 (2006)

Section

Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.