Behavior of low alloy steel SA-508 and carbon steel A-410b in operation and shutdown conditions in primary loop of pressurized water reactor (PWR)
DOI:
https://doi.org/10.3989/revmetalm.2000.v36.i2.560Keywords:
Corrosión kinetic, Low alloy and carbon steels, Galvanic coupling, Shutdown and operation conditions, PWRAbstract
The corrosion rate of low alloy steel SA-508 and carbon steel A-410b in simulated operation and shutdown conditions of pressurized water reactor has been determined. Moreover potentiodynamic polarization curves and galvanic effect through coupling of AISI-304 have been carried out under shutdown simulated condition.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2000 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.