New technique of stereolithography to local curing in thermosensitive resins using CO2 laser
DOI:
https://doi.org/10.3989/revmetalm.1998.v34.i2.689Keywords:
Láser, CO2, Thermosensitive resins, StereolithographyAbstract
A theoretical and experimental study of thermosensitive resins used in thermal stereolithography is presented. The process of local curing through the application of infrared radiation, which has proved to be useful in a new technique for the making of prototypes by means of selective heating with CO2 laser (10.6μm), is studied. The ideal composition of the thermosensitive resins has proved to be 10 parts epoxy, 1.4 part diethylene triamine (the curing agent) and 0.7 part silica powder. A physical theoretical model is applied for control of the parameters which influence the confinement of the curing in the irradiated bulk. A mathematical model is applied too; it was developed through the resolution of the heat conduction equation dependent on time in cylindrical co-ordinates, which enables to determine the behaviour of curing in terms of irradiation conditions.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1998 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.