Vol. 34 No. 2 (1998)

I Reunión Iberoamericana de Síntesis y Procesamiento de Materiales por Láser. Madrid, 27-29 de mayo de 1998

DOI: https://doi.org/10.3989/revmetalm.1998.v34.i2

Published: 1998-04-30

Articles

[es] Production of thin films by means of pulsed laser deposition

C. N. Afonso

75-77
- PDF
[es] Production and treatment of Si_1-xGe_x films by excimer laser assisted techniques

J. Castro, S. Chiussi, J. Serra, B. León, M. Pérez-Amor, S. Martelli, R. Larciprete, N. Frangis

78-81
- PDF
[es] Pulsed laser deposition of Al₂O₃ thin film on silicon

A. Lamagna, S. Duhalde, L. Correrá, S. Nicoletti

82-86
- PDF
[en] Coatings of metal substrates assisted by laser radiation

H. Caudevilla, A. Romo, J. C. Domingo, C. López, J. C. Díez, J. I. Peña, G. F. de la Fuente

87-88
- PDF
[es] Production of calcium phosphate coatings by laser ablation for biomedical applications

M. B. Mayor, J. L. Arias, F. J. García-Sanz, J. Pou, B. León-Camacho, M. Pérez-Amor

89-93
- PDF
[es] Deposit of carbon nitride films by laser ablation

R. Soto, P. González, J. Pou, B. León, M. Pérez-Amor

94-97
- PDF
[en] Nd:YAG laser in art works restoration

T. Flores, L. Ponce, B. Moreno, M. Arronte, M. Fernández, C. García

98-100
- PDF
[pt] Excimer laser cleaning of mud stained paper and parchment

J. P. Duarte, P. Peças

101-103
- PDF
[es] Materials surface treatments by concentrated solar light: a renewable energy option

D. Martínez, J. Rodríguez

104-108
- PDF
[es] Titanium nitriding by laser and concentrated solar beams

I. García, J. Sánchez-Olías, J. J. Damborenea, A. J. Vázquez

109-113
- PDF
[en] Laser surface alloying of aluminium-transition metal alloys

A. Almeida, R Vilar

114-119
- PDF
[es] Problems of laser cladding technique and influence of the laser processing parameters

M. Cadenas, J. M. Cuetos, E. Fernández Rico, J. M. Sierra

120-125
- PDF
[es] Laser surface hardening of gray cast irons

A. L. Maco, F. J. Belzunce

126-130
- PDF
[pt] Determinaçao da absorçao do feixe láser em ensaios de refusao em regime continuo

M. Lima, J. D. Wagnière

131-134
- PDF
[en] Physical metallurgy of laser surface melted plastic mould steels: a case study

R. Colaço, R. Vilar

135-139
- PDF
[es] Surface heat treatment of U8 steel by Nd:YAG laser

J. S. Ceballos-Ruano, G. Muñiz, R. Sagaró, B. Barja, C. Torres

140-143
- PDF
[en] Silicon superficial texturing bypulsed laser

L. Ponce, A. Castellanos, M. Arronte, T. Flores, E. Rodríguez, R. León, A. Montaigne

144-147
- PDF
[pt] Heating of multi-layered samples by a Nd: YAG pulsed laser

O. O. Diniz Neto

148-153
- PDF
[pt] Copper coatings on stainless steel by laser cladding

M. Reis, S. Estanislau, A. Cabral, P. Peças, H. Gouveia

154-161
- PDF
[en] High T_c superconducting current leads laser fabrication

J. C. Díez, L. A. Angurel, J. I. Peña, G. F. de la Fuente

162-163
- PDF
[es] a-SiN:H films modified by ArF excimer laser irradiation

N. Banerji, J. Serra, S. Chiussi, F. Lusquiños, B. León, M. Pérez-Amor

164-169
- PDF
[es] Coating with high power diode lasers

J. L. Molpeceres, M. J. Tomás, B. Pérez, L. Leal

170-174
- PDF
[es] Surface alloying of nickel based superalloys by laser

G. P. Rodríguez, I. García, J. J. Damborenea

175-179
- PDF
[en] Properties of ceramic oxides processed by laser

M. Virto, J. I. Peña, J. C. Díez, G. F. de la Fuente

180-182
- PDF
[es] Laser cladding of quasicrystalline alloys

F. Audebert, R Colaço, R. Vilar, H. Sirkin

183-187
- PDF
[es] An introduction to industrial applications of lasers. Economical aspects and new developments

J. M. Orza

188-193
- PDF
[es] Nd:YAG laser drilling of slate

M. S. Larosi, F. Lusquiños, J. Pou, R. Soto, M. Pérez-Amor

194-196
- PDF
[en] New technique of stereolithography to local curing in thermosensitive resins using CO₂ laser

A. L. J. Munhoz, P. R. S. Wagner, M. C. F. Ierardi, A. E. Kiel, M. A. F. Scarparo, S. D. Allen

197-201
- PDF
[es] Welding of dissimilar metáis by GO₂ lasers

F. Garciandía, F. Zubiri, J. L. Etayo, R. Cervantes, I Iriberri

202-205
- PDF
[en] Micromachining of Al₂O₃-TiC ceramics by excimer laser

V. Oliveira, R Vilar, O. Conde

206-209
- PDF
[pt] Laser welding of tailored blanks

P. Peças, H. Gouveia, L. Quintino, M. Rasmussen, F. O. Olsen

210-216
- PDF
[pt] Abrasive water jet: a complementary tool

J. P. Duarte, P. Peças, E. Nunes, H. Gouveia

217-219
- PDF
[es] Effect of the cutting conditions with a Nd:YAG laser on stainless steels surface structure and microcomposition

A. Ramírez, J. Pascual, J. Lasema, M. V. Moya, J. Zapatero, T. Fernández

220-226
- PDF
[es] Aluminium alloys welding with high-power Nd:YAG lasers

J. A. García Orza

227-231
- PDF
[pt] Thin-sheet zinc-coated and carbon steels laser welding

P. Peças, H. Gouveia, L. Quintino

232-241
- PDF

Bibliographical Information

[es] Información Bibliográfica

P. A., M. M., A. M. C., J. F. B.

242-244
- PDF

Vol. 34 No. 2 (1998)

Articles

[es] Production of thin films by means of pulsed laser deposition

[es] Production and treatment of Si1-xGex films by excimer laser assisted techniques

[es] Pulsed laser deposition of Al2O3 thin film on silicon

[en] Coatings of metal substrates assisted by laser radiation

[es] Production of calcium phosphate coatings by laser ablation for biomedical applications

[es] Deposit of carbon nitride films by laser ablation

[en] Nd:YAG laser in art works restoration

[pt] Excimer laser cleaning of mud stained paper and parchment

[es] Materials surface treatments by concentrated solar light: a renewable energy option

[es] Titanium nitriding by laser and concentrated solar beams

[en] Laser surface alloying of aluminium-transition metal alloys

[es] Problems of laser cladding technique and influence of the laser processing parameters

[es] Laser surface hardening of gray cast irons

[pt] Determinaçao da absorçao do feixe láser em ensaios de refusao em regime continuo

[en] Physical metallurgy of laser surface melted plastic mould steels: a case study

[es] Surface heat treatment of U8 steel by Nd:YAG laser

[en] Silicon superficial texturing bypulsed laser

[pt] Heating of multi-layered samples by a Nd: YAG pulsed laser

[pt] Copper coatings on stainless steel by laser cladding

[en] High Tc superconducting current leads laser fabrication

[es] a-SiN:H films modified by ArF excimer laser irradiation

[es] Coating with high power diode lasers

[es] Surface alloying of nickel based superalloys by laser

[en] Properties of ceramic oxides processed by laser

[es] Laser cladding of quasicrystalline alloys

[es] An introduction to industrial applications of lasers. Economical aspects and new developments

[es] Nd:YAG laser drilling of slate

[en] New technique of stereolithography to local curing in thermosensitive resins using CO2 laser

[es] Welding of dissimilar metáis by GO2 lasers

[en] Micromachining of Al2O3-TiC ceramics by excimer laser

[pt] Laser welding of tailored blanks

[pt] Abrasive water jet: a complementary tool

[es] Effect of the cutting conditions with a Nd:YAG laser on stainless steels surface structure and microcomposition

[es] Aluminium alloys welding with high-power Nd:YAG lasers

[pt] Thin-sheet zinc-coated and carbon steels laser welding

Bibliographical Information

[es] Información Bibliográfica

Make a Submission

Language

Indexing and quality

Plagiarism Detection Tool

Social Networks

Syndication

[es] Production and treatment of Si_1-xGe_x films by excimer laser assisted techniques

[es] Pulsed laser deposition of Al₂O₃ thin film on silicon

[en] High T_c superconducting current leads laser fabrication

[en] New technique of stereolithography to local curing in thermosensitive resins using CO₂ laser

[es] Welding of dissimilar metáis by GO₂ lasers

[en] Micromachining of Al₂O₃-TiC ceramics by excimer laser