Characterizing the mechanical deformation response of AHSS steels: A comparative study of cyclic plasticity models under monotonic and reversal loading
DOI:
https://doi.org/10.3989/revmetalm.251Keywords:
Advanced high strength steels, Cyclic plasticity, Finite element modeling, Kinematic hardening, TRIP, TWIPAbstract
This study evaluates the performance of a user-defined combined hardening modeling method for advanced high-strength steels (AHSS) under monotonic and reversal loading conditions. The plastic behavior of TWIP980 and TRIP980 AHSS sheet metals is investigated using a cyclic plasticity modeling approach. The model incorporates an isotropic von Mises yield criterion and a single-term Chaboche nonlinear kinematic hardening rule. Monotonic and reversal loading stress-strain curves are predicted and compared with experimental results. The model accurately captured the Bauschinger effect for both materials, but it needs help to effectively model the permanent softening behavior observed in TWIP980 steel. Overall, the proposed modeling method agrees well with experimental results for monotonic loading and accurately represents the Bauschinger effect and transient behavior during reversal loading. However, better improvements are needed to capture the permanent softening behavior of TWIP980 steel.
Downloads
References
Akşen, T.A., Firat, M. (2023). Effect of the yield surface evolution on the earing defect prediction. Rev. Metal. 59 (1), e235. https://doi.org/10.3989/revmetalm.235
Armstrong, P.J., Frederic, C.O. (2007). A mathematical representation of the multiaxial Bauschinger effect. Mater. High Temp. 24 (1), 1-26. https://doi.org/10.3184/096034007X207589
Banabic, D. (2010). Sheet Metal Forming Processes - Constitutive Modelling and Numerical Simulation. Berlin, Germany, Springer. https://doi.org/10.1007/978-3-540-88113-1
Besseling, J.F. (1958). A theory of plastic and creep deformations of an initially isotropic material Showing Anisotropic Strain-Hardening, Creep Recovery, and Secondary Creep. J. Appl. Mech. 25 (4), 529-536. https://doi.org/10.1115/1.4011867
Burlet, H., Cailletaud, G. (1986). Numerical techniques for cyclic plasticity at variable temperature. Eng. Comput. 3 (2), 143-153. https://doi.org/10.1108/eb023652
Chaboche, J.L., Rousselier, G. (1983). On the plastic and viscoplastic constitutive equations - Part I: Rules developed with internal variable concept. J. Press. Vessel Technol. 105 (2), 153-158. https://doi.org/10.1115/1.3264257
Çaylak, M., Akşen, T.A., Fırat, M. (2022). Evaluating the effectiveness of combined hardening models to determine the behavior of a plate with a hole under combined loadings. Eur. Mech. Sci. 6 (2), 97-104. https://doi.org/10.26701/ems.1051057
Dafalias, Y.F., Popov, E.F. (1976). Plastic internal variables formalism of cyclic plasticity. J. Appl. Mech. 43 (4), 645-651. https://doi.org/10.1115/1.3423948
Dieter, G.E. (1988). Mechanical Metallurgy. SI metric ed. New York, USA, Mc-Graw Hill Book Company.
Firat, M. (2008). A numerical analysis of sheet metal formability for automotive stamping applications. Comput. Mater. Sci. 43 (4), 802-811. https://doi.org/10.1016/j.commatsci.2008.01.068
Firat, M., Karadeniz, E., Yenice, M., Kaya, M. (2013). Improving the accuracy of stamping analyses including springback deformations. J. Mater. Eng. Perform. 22, 332-337. https://doi.org/10.1007/s11665-012-0257-5
Fu, B., Yang, W.Y., Wang, Y.D., Li, L.F., Sun, Z.Q., Ren, Y. (2014). Micromechanical behavior of TRIP-assisted multiphase steels studied with in situ high-energy X-ray diffraction. Acta Mater. 76, 342-354. https://doi.org/10.1016/j.actamat.2014.05.029
Fu, J., Barlat, F., Kim, J.H., Pierron, F. (2016). Identification of nonlinear kinematic hardening constitutive model parameters using the virtual fields method for advanced high strength steels. Int. J. Solids Struct. 102-103, 30 - 43. https://doi.org/10.1016/j.ijsolstr.2016.10.020
Grassel, O., Krüger, L., Frommeyer, G., Meyer, L.W. (2000). High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - applications. Int. J. Plast. 16 (10-11), 1391-1409. https://doi.org/10.1016/S0749-6419(00)00015-2
He, W., Meng, B., Song, B., Wan, M. (2022). Grain size effect on cyclic deformation behavior and springback prediction Ni-based superalloy foil. Trans. Nonferrous Metal. Soc. China 32 (4), 1188 - 1204. https://doi.org/10.1016/S1003-6326(22)65866-7
Jacques, P.J., Delannay, F., Ladriere, J. (2001). On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels. Metal. Mater. Trans. A 32, 2759-2768. https://doi.org/10.1007/s11661-001-1027-4
Joo, G., Huh, H. (2017). Modeling of rate-dependent hardening behaviors of the TWIP980 steel sheet in tension and compression. Procedia Eng. 207, 143-148. https://doi.org/10.1016/j.proeng.2017.10.752
Joo, G., Huh, H. (2018). Rate-dependent isotropic-kinematic hardening model in tension-compression of TRIP and TWIP steel sheets. Int. J. Mech. Sci. 146-147, 432-444. https://doi.org/10.1016/j.ijmecsci.2017.08.055
Keeler, S., Kimchi, M., Mooney, P.J. (2017). Advanced High-Strength Steels Application Guidelines. Version 6.0, World Auto Steel. https://www.worldautosteel.org/download_files/AHSS%20Guidelines%20V6/00_AHSSGuidelines_V6_20170430.pdf
Koo, G.H., Lee, J.H. (2007). Investigation of ratcheting characteristics of modified 9Cr-1Mo steel by using the Chaboche constitutive model. Int. J. Press. Vessel Pip. 84 (5), 284-292. https://doi.org/10.1016/j.ijpvp.2006.12.002
Marc (2018a). Volume A: Theory and User Information.
Marc (2018b). Volume B: Element library
Meyer, K.A., Ekh, M., Ahlström, J. (2018). Modeling of kinematic hardening at large biaxial deformations in pearlitic steel. Int. J. Solids Struct. 130, 122-132. https://doi.org/10.1016/j.ijsolstr.2017.10.007
Mróz, Z. (1967). On the description of anisotropic work hardening. J. Mech. Phys. Solids. 15 (3), 163-175. https://doi.org/10.1016/0022-5096(67)90030-0
Muransky, O., Sittner, P., Zrník, J., Oliver, E.C. (2008). In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP assisted steels at room and elevated temperatures. Acta Mater. 56 (14), 3367-3379. https://doi.org/10.1016/j.actamat.2008.03.026
Ohno, N., Wang, J.-D. (1993). Kinematic hardening rules with critical state of dynamic recovery. Part I: formulation and basic features for ratchetting behavior. Int. J. Plast. 9 (3), 375-390. https://doi.org/10.1016/0749-6419(93)90042-O
Pajand, M.R., Sinaie, S. (2009). On the calibration of Chaboche model and modified hardening rule for uniaxial ratcheting prediction. Int. J. Solids Struct. 46 (16), 3009-3017. https://doi.org/10.1016/j.ijsolstr.2009.04.002
Paul, S.K., Sivaprasad, S., Dhar, S., Tarafder, M., Tarafder, S. (2010). Simulation of cyclic plastic deformation response in SA333 C-Mn steel by a kinematic hardening model. Comput. Mater. Sci. 48 (3), 662-671. https://doi.org/10.1016/j.commatsci.2010.02.037
Prager, W. (1956). A new method of analyzing stresses and strains in work hardening plastic solids. ASME J. Appl. Mech. 23 (4), 493-496. https://doi.org/10.1115/1.4011389
Prakash, A., Hochrainer, H., Reisacher, E., Riedel, H. (2008). Twinnig models in self-consistent texture simulations of TWIP steels. Steel Res. Int. 79 (8), 645-645. https://doi.org/10.1002/srin.200806178
Sapna, S., Tamilarasi, A., Kumar, M.P. (2012). Backpropagation learning algorithm based on Levenberg Marquardt algorithm. Comput. Sci. Inf. Technol., pp. 393-398. https://doi.org/10.5121/csit.2012.2438
Shan, T.K., Li, S.H., Zhang, W.G., Xu, Z.G. (2018). Prediction of martensitic transformation and deformation behavior in the TRIP steel sheet forming. Mater. Des. 29 (9), 1810-1816. https://doi.org/10.1016/j.matdes.2008.03.023
Skibicki, D., Pejkowski, L., Karolczuk, A., Seyda, J. (2022). Verification of the Tanaka non-proportional isotropic cyclic hardening model under asynchronous loading. Int. J. Solids Struct. 254-255, 111896. https://doi.org/10.1016/j.ijsolstr.2022.111896
Yıldız, H., Kırlı, O. (2004). Non-linear finite element modeling of deep drawing process. Pamukkale University J. Eng. Sci. 10 (3), 317-326.
Yu, K., Choi, H., Ha, J., Yoon, J.W. (2023). Bauschinger effect calibration by the different types of loading/reverse loading tests for springback prediction in sheet metal forming. Int. J. Mater. Form. 16, 16. https://doi.org/10.1007/s12289-023-01738-3
Zang, S.L., Guo, C., Thuillier, S., Lee, M.G. (2011). A model of one-surface cyclic plasticity and its application to springback prediction. Int. J. Mech. Sci. 53 (6), 425-435. https://doi.org/10.1016/j.ijmecsci.2011.03.005
Ziegler, H.A. (1959). A modification of Prager's hardening rule. Q. Appl. Math. 17 (1), 55-65. https://doi.org/10.1090/qam/104405
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.