Reaustenitisation of steels with different initial microstructures

Authors

  • E. García-Caballero Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC
  • C. Capdevila Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC
  • D. San Martín Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC
  • C. García de Andrés Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC

DOI:

https://doi.org/10.3989/revmetalm.2004.v40.i3.267

Keywords:

Reaustenitisation, modelling, phase transformations, kinetics, steels

Abstract


During the last years, physical-mathematical models concerning continuous cooling and isothermal phase transformations valid for wide range of steels have been attained. However, the modelling of continuous heating transformations has not undergone the same development than in cooling. This investigation concerns with the study and modélisation of continuous heating phase transformations to study the process which is generally referred to as austenitisation of the steel. Therefore, our main aim is to describe those processes which control the non-isothermal formation of austenite in steels with initial microstructures of ferrite and/or pearlite.

Downloads

Download data is not yet available.

Downloads

Published

2004-06-30

How to Cite

García-Caballero, E., Capdevila, C., San Martín, D., & García de Andrés, C. (2004). Reaustenitisation of steels with different initial microstructures. Revista De Metalurgia, 40(3), 214–218. https://doi.org/10.3989/revmetalm.2004.v40.i3.267

Issue

Section

Articles

Most read articles by the same author(s)