Recrystallization behaviour of cold rolled aluminium from cast strips
DOI:
https://doi.org/10.3989/revmetalm.2000.v36.i6.594Keywords:
Aluminium continuous sheet casting, Strip casting, Twin roll cast, Precipitation, Nucleation. Recrystallization, PretreatmentAbstract
This paper revises the literature on the problems in recrystallization of cold rolled cast strips. The phenomenon of the precipitation previous or simultaneous to recrystallization, that may affect the nucleation of the recrystallization, is explained. The use of TTT (Time, Temperature, Transformation) curves to obtain the critical time and temperature without cutting the nose of the precipitation zone are examined for Al-Mn alloys it is also explained the obtainment of CTT (Concentration, Time, Temperature) curves and "grain size diagrams" on the basis of heating rate and Mn in solid solution obtainment.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2000 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
