Corrosión atmosférica del acero suave

M. Morcillo; D. de la Fuente; I. Díaz; H. Cano

doi:10.3989/revmetalm.1125

Autores/as

M. Morcillo Dept. Surface Engineering, Corrosion and Durability. National Centre for Metallurgical Research (CENIM, CSIC)
D. de la Fuente Dept. Surface Engineering, Corrosion and Durability. National Centre for Metallurgical Research (CENIM, CSIC)
I. Díaz Dept. Surface Engineering, Corrosion and Durability. National Centre for Metallurgical Research (CENIM, CSIC)
H. Cano Dept. Surface Engineering, Corrosion and Durability. National Centre for Metallurgical Research (CENIM, CSIC)

DOI:

https://doi.org/10.3989/revmetalm.1125

Palabras clave:

Corrosión atmosférica, Acero suave, Larga duración, Morfología, Revisión

Resumen

La corrosión atmosférica del acero suave es un tema de gran amplitud que ha sido tratado por muchos autores en numerosas regiones del mundo. Este artículo de compilación incorpora publicaciones relevantes sobre esta temática, en particular sobre la naturaleza de los productos de corrosión atmosférica, mecanismos y cinética de los procesos de corrosión atmosférica, prestando una atención especial a dos aspectos sobre los que la información publicada ha sido menos abundante: a) morfología de los productos de corrosión del acero y capas de productos de corrosión, y b) corrosión atmosférica a larga duración (> 10 años).

Descargas

Los datos de descargas todavía no están disponibles.

Citas

[1] S. W. Dean, D. Knotkova and K. Kresilova, ISOCORRAG, Internacional Atmospheric Exposure Program: Summary of Results, ASTM Data Series 71, ASTM International, West Conshohocken, 2010.

[2] M. Morcillo, E. Almeida, B. Rosales, J. Uruchurtu and M. Marrocos, Corrosión y Protección de Metales en las Atmósferas de Iberoamérica (MICAT), CYTED, Madrid, 1998.

[3] J. Tidblad, V. Kucera and A.A. Mikhailov, Report No 30, UN/ECE International Co-Perative Programme on Effects on Materials, Including Historic and Cultural Monuments (ICP Materials), 1998.

[4] K. Barton, Protection against Atmospheric Corrosion, Eds. Wiley, London, 1976.

[5] J. M. Costa, M. Morcillo and S. Feliu, Effect of environmental parameters on atmospheric corrosion of metals, In: Air Pollution Control (Vol. 2), P.N. Cheremisinoff (Ed.), Houston, EE.UU., 1989, pp. 197-238.

[6] V. Kucera and E. Mattsson, Atmospheric Corrosion, In: Corrosion Mechanims, F. Mansfeld (Ed.), New York, 1987, pp. 211-284.

[7] C. Leygraf and T.E. Graedel, Atmospheric Corrosion, Wiley-Interscience, New York, 2000.

[8] I. L. Rozenfeld, Atmospheric Corrosion of Metals, NACE, Houston, 1972.

[9] S.W. Dean, Corrosion-Prevention 9th- Proceedings, Australasian Corrosion Association, Inc., November 28-30, Melbourne, Australia, 1994, pp. 1-12.

[10] Ph. Dillmann, F. Mazaudier and S. Hoerlé, Corros. Sci. 46 (2004) 1.401-1.429.

[11] S. Feliu, M. Morcillo and S. Feliu Jr., Corros. Sci. 34 (1993) 415-422. http://dx.doi.org/10.1016/0010-938X(93)90113-U

[12] C. Arroyave and M. Morcillo,Trends in Corros. Res. 2 (1997) 1-16.

[13] R. M. Cornell and V. Schwertmann, Iron Oxides in the Laboratory: Preparation and Characterization, Wiley-VCH, Weinheim, 1991.

[14] D.R. Lide, CRC Handbook of Chemistry and Physics, CRC Press, Boston, 1991.

[15] W.F. Linke, Solubilities of inorganic and metalorganic compounds, Vol. 1, D. Van Nostrand Company, Pricenton, 1958.

[16] J.E. Hiller, Werkst. Korros. 17 (1966) 943-951. http://dx.doi.org/10.1002/maco.19660171104

[17] T. Misawa, Corros. Sci. 13 (1973) 659-676. http://dx.doi.org/10.1016/S0010-938X(73)80037-X

[18] E. Almeida, M. Morcillo, B. Rosales and M. Marrocos, Mater. Corros. 51 (2000) 859-864. http://dx.doi.org/10.1002/1521-4176(200012)51:12<859::AID-MACO859>3.0.CO;2-G

[19] P. Keller, Werkst. Korros. 20 (1969) 102-108. http://dx.doi.org/10.1002/maco.19690200205

[20] T. Misawa, T. Kyuno, W. Suëtaka and S. Shimodaira, Corros. Sci. 11 (1971) 35-48. http://dx.doi.org/10.1016/S0010-938X(71)80072-0

[21] H. Schwarz, Werkst. Korros. 23 (1972) 648-663. http://dx.doi.org/10.1002/maco.19720230805

[22] A.K. Singh, T. Ericsson and L. Häggström, Corros. Sci. 25 (1985) 931-945. http://dx.doi.org/10.1016/0010-938X(85)90022-8

[23] H. Baum, U. Rasemann, K. Rösler, S. Böhmer and E. Kunze, Neue Hutte 19 (1974) 423-429.

[24] T. Misawa, K. Asami, K. Hashimoto and S. Shimodaira, Corros. Sci. 14 (1974) 279-289. http://dx.doi.org/10.1016/S0010-938X(74)80037-5

[25] A. Raman and B. Kuban, Corros. 44 (1988) 483-488. http://dx.doi.org/10.5006/1.3583966

[26] K. Rösler, H. Baum, O. Kukurs, A. Upite and D. Knotkova, Prot. Met. 17 (1981) 514-522.

[27] R.A. Francis, Proc. of the 10th Int. Congr. on Met. Corros., Vol. 1, Madras, India, November 28-30, Oxford and IBH Publishing Co., 1987, pp. 121-130.

[28] T. Misawa, K. Hashimoto and S. Shimodaira, Corros. Sci. 14 (1974) 131-149. http://dx.doi.org/10.1016/S0010-938X(74)80051-X

[29] K. Nomura, M. Tasaka and Y. Ujihira, Corros. 44 (1988) 131-135. http://dx.doi.org/10.5006/1.3583914

[30] L. Espada, P. Merino, A. González and A. Sánchez, Proc. of the 10th Int. Congr. on Met. Corros., Vol. 1, Oxford and IBH Publishing Co., Madras, India, 1987, pp. 3-7.

[31] R.A. Antunes, J. Costa and D.L. Araujo, Mater. Res. 6 (2003) 403-408. http://dx.doi.org/10.1590/S1516-14392003000300015

[32] S. Oesch and P. Heimgartner, Mater. Corros. 47 (1996) 425-438. http://dx.doi.org/10.1002/maco.19960470803

[33] S.E. Flores, Ph. Doctoral Thesis,Facultad de CC. Químicas, Universidad Complutense de Madrid, 1994.

[34] S.E. Flores and M. Morcillo, Surf. Coat. Int., 82 (1999) 19-25. http://dx.doi.org/10.1007/BF02693013

[35] M. P. Cindra-Fonseca, I. N. Bastos, A. Caytuero and E. M. Baggio-Saitovitch. Corros. Sci. 49 (2007) 1.949-1.962.

[36] D. de la Fuente, I. Díaz, J. Simancas, B. Chico and M. Morcillo, Corros. Sci. 53 (2011) 604-617. http://dx.doi.org/10.1016/j.corsci.2010.10.007

[37] A. Raman, S. Nasrazadani and L. Sharma, Metallography 22 (1989) 79-96. http://dx.doi.org/10.1016/0026-0800(89)90024-4

[38] A. Raman, S. Nasrazadani, L. Sharma and A. Razvan, Prakt. Metallogr. 24 (1987) 577-587.

[39] A. Raman, S. Nasrazadani, L. Sharma and A. Razvan, Prakt. Metallogr. 24 (1987) 535-548.

[40] A. Raman, A. Razvan, B. Kuban, K. A. Clement and E. Graves, Corros. 42 (1986) 447-455. http://dx.doi.org/10.5006/1.3583050

[41] A. Razvan and A. Raman, Prakt. Metallogr. 23 (1986) 223-236.

[42] K.K. Sagoe-Crentsil and F.P. Glasser, Corros. 49 (1993) 457-463. http://dx.doi.org/10.5006/1.3316072

[43] M. Morcillo, I. Díaz, B. Chico, J. Simancas and D. de la Fuente, Proc. of EUROCORR, Moscow, Russia, September 13-17, 2010.

[44] K. Asami and M. Kikuchi, Corros. Sci. 45 (2003) 2.671-2.688.

[45] T. Kamimura, S. Nasu, T. Tazaki, K. Kuzushita and S. Morimoto, Mater. Trans. 43 (2002) 694-703. http://dx.doi.org/10.2320/matertrans.43.694

[46] H. Okada and H. Shimada, Corros. 30 (1974) 97-101.

[47] E.S. Ayllón, S. L. Granese, C. Bonazzola and B. M. Rosales, Rev. Iber. Corros. y Prot. XVII, 3 (1986) 205-211.

[48] W. H.J. Vernon, Trans. Faraday Soc. 31 (1935) 1.668-1.700.

[49] G. Schikorr, Werkst. Korros. 14 (1963) 69-80. http://dx.doi.org/10.1002/maco.19630140203

[50] U.R. Evans, Trans. Inst. Met. Finish 37 (1960) 1.

[51] U.R. Evans and C.A.J. Taylor, Corros. Sci. 12 (1972) 227-246. http://dx.doi.org/10.1016/S0010-938X(72)90671-3

[52] M. Stratmann, K. Bohnenkamp and H. J. Engell, Corros. Sci. 23 (1983) 969-985. http://dx.doi.org/10.1016/0010-938X(83)90024-0

[53] M. Stratmann and K. Hofffmann, Corros. Sci. 29 (1989) 1.329-1.352.

[54] M. Stratmann and J. Müller, Corros. Sci. 36 (1994) 327-359. http://dx.doi.org/10.1016/0010-938X(94)90161-9

[55] M. Stratmann and H. Streckel, Corros. Sci. 30 (1990) 681-696. http://dx.doi.org/10.1016/0010-938X(90)90032-Z

[56] M. Stratmann, H. Streckel, K.T. Kim and S. Crockett, Corros. Sci. 30 (1990) 715-734. http://dx.doi.org/10.1016/0010-938X(90)90034-3

[57] K. E. Heusler, Z. Elektrochem. 62 (1958) 582.

[58] J. Bockris, D. Drazic and A. R. Despic, Electrochim. Acta 4 (1961) 325-361. http://dx.doi.org/10.1016/0013-4686(61)80026-1

[59] U.R. Evans, Nature 206 (1965) 980-982. http://dx.doi.org/10.1038/206980a0

[60] T. Nishimura, I. Tanaka and Y. Shimizu, Tetsuto-Hagane 81 (1995) 1.079-1.084.

[61] U.R. Evans, Corros. Sci. 9 (1969) 813-821. http://dx.doi.org/10.1016/S0010-938X(69)80074-0

[62] H.Okada, Y. Hosoi and H. Naito, Tetsu-To Hagane 56 (1970) 277-284.

[63] I. Matsushima and T. Ueno, Boshoku Gijutsu 17 (1968) 458-464.

[64] H. Antony, L. Legrand, L. Maréchal, S. Perrin, Ph. Dillmann and A. Chaussé, Electrochim. Acta 51 (2005) 745-753. http://dx.doi.org/10.1016/j.electacta.2005.05.049

[65] I. Matsushima and T. Ueno, Corros. Sci. 11 (1971) 129-140. http://dx.doi.org/10.1016/S0010-938X(71)80089-6

[66] H. Okada, Y. Hosoi and H. Naito, Corros. 26 (1970) 429-430.

[67] I. Suzuki, N. Masuko and Y. Hisamatsu, Corros. Sci. 19 (1979) 521-535.

[68] K. Barton and Z. Bartonova, Werkst. Korros. 20 (1969) 216-221. http://dx.doi.org/10.1002/maco.19690200307

[69] M. Stratmann, K. Bohnenkamp and T. Ramchandran, Corros. Sci. 27 (1987) 905-926. http://dx.doi.org/10.1016/0010-938X(87)90058-8

[70] M. Stratmann,Metal. Odlew. 16 (1990) 46-52.

[71] H. Schwarz, Werkst. Korros. 16 (1965) 93-103. http://dx.doi.org/10.1002/maco.19650160202

[72] S. Feliu and M. Morcillo, Corrosion atmosférica, In: Corrosion y Protección Metálicas, S. Feliú and C. Andrade (Eds), CSIC, Nuevas Tendencias, Madrid, 1991, pp. 23-40.

[73] G.M. Florianovitch, L.A. Sokolova and Y.A.M. Kolotyrkin, Electrochim. Acta 12 (1967) 879-887. http://dx.doi.org/10.1016/0013-4686(67)80124-5

[74] A.G. Tanner, Chem. Ind. 13 (1964) 1.027-1.028.

[75] T.K. Ross and B. G. Callaghan, Corros. Sci. 6 (1966) 337-343. http://dx.doi.org/10.1016/S0010-938X(66)80040-9

[75] J.F. Henriksen, Corros. Sci. 9 (1969) 573-577. http://dx.doi.org/10.1016/S0010-938X(69)80112-5

[76] I. M. Allam, J. S. Arlow and H. Saricimen, Corros. Sci. 32 (1991) 417-432. http://dx.doi.org/10.1016/0010-938X(91)90123-7

[77] F. Corvo, Corros. 40 (1984) 170-175. http://dx.doi.org/10.5006/1.3581934

[78] R. Ericsson, Werkst. Korros. 29 (1978) 400-403. http://dx.doi.org/10.1002/maco.19780290604

[79] E. Almeida, M. Morcillo and B. Rosales, Mater. Corros. 51 (2000) 865-874. http://dx.doi.org/10.1002/1521-4176(200012)51:12<865::AID-MACO865>3.0.CO;2-S

[80] ISO 9223, Corrosion of Metals and Alloys - Classification of Corrosivity of Atmospheres, ISO, Geneva, 1990.

[81] D. Neff, L. Bellot-Gurlet, Ph. Dillmann, S. Reguer and L. Legrand, J. Raman Spectrosc. 37 (2006) 1.228-1.237.

[82] S.J. Oh, D.C. Cook and H. E. Towsend, Corros. Sci. 41 (1999) 1.687-1.702.

[83] D.C. Cook,Corros. Sci. 47 (2005) 2550-2570. http://dx.doi.org/10.1016/j.corsci.2004.10.018

[84] M. Yamashita, K. Asami, T. Ishikawa, T. Ohtsuka, H. Tamura and T. Misawa, Zairyo-to Kankyo 50 (2001) 521-530.

[85] J. Simancas, K.L. Scrivener and M. Morcillo, A Study of rust morphology, contamination and porosity by backscattered electron imaging, In: Atmospheric Corrosion. W. W. Kirk, H. H. Lawson (Eds)., ASTM STP 1239, Philadelphia, 1995.

[86] G.B. Clark, G. K. Berukshtis and Z. I. Ignatova, Proc. of the 3rd Int. Congr. on Met. Corros., Moscow, Rusia, 1969, pp. 406-412.

[87] I. Suzuki, Y. Hisamatsu and N. Masuko, J. electrochem. Soc. 127 (1980) 2.210-2.215.

[88] H. Okada, Y. Osoi, K. Yukawa and H. Naito, Proc. of the 4th Int. Congr. on Met. Corros., Amsterdam, The Netherlands, 1969, pp. 392-398.

[89] M. Yamashita, H. Miyuki, Y. Matsuda, H. Nagano and T. Misawa, Corros. Sci. 36 (1994) 283-299. http://dx.doi.org/10.1016/0010-938X(94)90158-9

[90] M. Benarie and F.L. Lipfert, Atmos. Environ. 20 (1986) 1947-1958. http://dx.doi.org/10.1016/0004-6981(86)90336-7

[91] K. Bohnenkamp, G. Burgmann and W. Schwenk, Stahl Eisen 93 (1973) 1045-1060.

[92] R. A. Legault and G. Preban, Corros. 31 (1975) 117-122.

[93] M. Pourbaix, The linear bilogarithmic law for atmospheric corrosion, In: Atmospheric Corrosion, W. H. Aylor, (Ed.), J. Wiley and Sons, New York, 1982, pp. 107-121.

[94] S. Feliu and M. Morcillo, Atmospheric corrosion testing in Spain, In: Atmospheric Corrosion, W. H. Aylor, (Ed.), J. Wiley and Sons, New York, 1982, pp. 913-922.

[95] D. Knotkova, K. Barton and M. Cerny, Atmospheric corrosion testing in Czechoslovakia, In: Atmospheric Corrosion, W. H. Aylor, (Ed.), J. Wiley and Sons, New York, 1982, pp. 991-1014. http://dx.doi.org/10.1520/STP33184S

[96] Y.N. Mikhailovski, P.V. Strekalov and V.V. Agafonov, Zaschita Metallov 16 (1980) 396-413.

[97] M. Morcillo, J. Simancas and S. Feliu, Longterm atmospheric corrosion in Spain: results after 13 to 16 years of exposure and comparison with worldwide data. In: Atmospheric Corrosion, W.W. Kirk, H.H. Lawson (Eds.), ASTM STP 1239, Philadelphia, 1995, pp. 195-214.

[98] S.W. Dean and D.B. Reiser, Analysis of longterm atmospheric corrosion results from ISOCORRAG Program. In: Outdoor Atmospheric Corrosion, H. E. Towsend (Ed.), ASTM STP 1421, Philadelphia, 2002.