Toughness improvement of an ultrahigh carbon steel by rolling bonding with a Cr-Mo steel
DOI:
https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1007Keywords:
Ultrahigh carbon steel, Laminated composite materials, Hot rolling, Toughness, impactAbstract
Laminated composite materials containing five layers of ultrahigh carbon steel, 1.35%C, and five layers of a Cr-Mo steel were processed by roll bonding. The rolling procedure improves the bonding of layers and refines the microstructure, diminishing grain size and removing the pearlitic zones. Charpy impact tests were carried out to evaluate the impact properties. Toughness of the laminated composite was highly improved respect to the ultrahigh carbon steel. Moreover, it was double than that of the Cr-Mo steel in the arrester orientation. These results reveal the important role of the interfaces in the mechanical properties of the composite materials.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2005 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.