A review of ordering phenomena in iron-silicon alloys
DOI:
https://doi.org/10.3989/revmetalm.1223Keywords:
Ordering, Iron-silicon alloys, Intermetallic phases, Mechanical properties, Phase diagramAbstract
Silicon steel is an industrially-desired alloy of iron and silicon, characterised by soft magnetic properties, low eddy-current losses, and low magnetostriction. Silicon steels have narrow hysteresis cycles, making them particularly advantageous in applications using electromagnetic fields, such as transformers, generators, electric motor cores, and few other components in industry. Despite its incontestable industrial value, there is not much agreement on the atomic structure of silicon steel. Gaining better understanding of e.g. ordering processes in Fe-Si alloys could not only explain their magnetic properties, but also open opportunities to reduce their weaker characteristics, such as brittleness that adversely affects silicon steel workability and its associated high production costs. This review summarises the state-of-the-art knowledge about ordering in silicon steel and describes the most relevant experimental techniques used for studying its microstructure. In addition, the process of building the iron rich part of the Fe-Si phase diagram is explained. Lastly, the influence of order on the alloy’s magnetic and mechanical properties is illustrated.
Downloads
References
[1] T.D. Yensen, University of Illinois Bulletin XIII (1915).
[2] J.A. Ewing, Magnetic Induction in Iron and Other Metals, The Electrician Printing and Publishing Co. Limited, London, 1900.
[3] G.A.V. Sowter, J. Audio Eng. Soc. 35 (1987) 760-777.
[4] T.D. Yensen, University of Illinois Bulletin (1914) 70.
[5] R.M. Bozorth, Ferromagnetism, MacMillan, London, 1951.
[6] B.D. Cullity, Introduction to Magnetic Materials, Addison-Wesley Publishing Company, Reading, Mass., 1972.
[7] C.E. Birchenall, Thermodynamics in Physical Metallurgy, American Society of Metals, Cleveland, 1950.
[8] T. Muto and Y. Takagi, Order-disorder Phenomena in Metals, F. Seitz and D. Turnbull (Eds.), Academic Press, 1955, pp. 193-282.
[9] B.D. Cullity, Elements of X-Ray Diffraction, Addison-Wesley Publishing Company, Inc., Notre Dame, Indiana, 1956.
[10] S. Guruswamy, G. Garside, C. Ren, B. Saha and M. Ramanathan, Prog. Cryst. Growth Ch. Mater. 57 (2011) 43-64. http://dx.doi.org/10.1016/j.pcrysgrow.2011.07.001
[11] E.S. Greiner, J.S. Marsh and B. Stoughton, The Alloys of Iron and Silicon, First Edit, McGraw - Hill, New York and London, 1933.
[12] C.P. Yap, J. Phys. Chem. 37 (1932) 951-967. http://dx.doi.org/10.1021/j150349a011
[13] M. Matsuo, ISIJ Int. 29 (1989) 809-827. http://dx.doi.org/10.2355/isijinternational.29.809
[14] J.E. May and D. Turnbull, Transactions of the Metallurgical Society of AIME 212 (1958) 769- 781.
[15] J.E. Thompson, Reviews of Physics in Technology (1970) 27-46. http://dx.doi.org/10.1088/0034-6683/1/1/303
[16] A.F. Filho, C. Bolfarini, Y. Xu and C.S. Kiminami, Scripta Mater. 42 (1999) 213-217. http://dx.doi.org/10.1016/S1359-6462(99)00324-3
[17] G. Tian and X. Bi, Surf. Coat. Tech. 204 (2010) 1295-1298. http://dx.doi.org/10.1016/j.surfcoat.2009.10.014
[18] K. Verbeken, I. Infante-Danzo, J. Barros- Lorenzo, J. Schneider and Y. Houbaert, Rev. Metal. 46 (2011) 458-468. http://dx.doi.org/10.3989/revmetalm.1010
[19] T. Ros-Yanez, M.D. Wulf and Y. Houbaert, J. Magn. Magn. Mater. 272-276, Supplement (2004) E521 - E522. http://dx.doi.org/10.1016/j.jmmm.2003.11.295
[20] A.F. Filho, C. Bolfarini, Y. Xu and C.S. Kiminami, Scripta Mater. 42 (2000) 213-217. http://dx.doi.org/10.1016/S1359-6462(99)00324-3
[21] S. Crottier-Combe, S. Audisio, J. Degauque, J.L. Porteseil, E. Ferrara, M. Pasquale and F. Fiorillo, J. Magn. Magn. Mater. 160 (1996) 151-153. http://dx.doi.org/10.1016/0304-8853(96)00144-8
[22] M. Rebhan, M. Rohwerder and M. Stratmann, Appl. Surf. Sci. 140 (1999) 99-105. http://dx.doi.org/10.1016/S0169-4332(98)00500-5
[23] M. Jitsukawa and Y. Hosoya, NKK Technical Review 88 (2003) 46-57.
[24] M. Abe, K. Okada and S. Fukuda, Method of Chemical Vapor Deposition in a Continuous Treatment Line, U.S. Patent 5352490, EE.UU., 1994.
[25] M. Enokizono, N. Teshima and K. Narita, IEEE T. Magn. Mag. 18 (1982) 1007-1013. http://dx.doi.org/10.1109/TMAG.1982.1061959
[26] K.I. Arai and Y. Yamashiro, J. Appl. Phys. 64 (1988) 5373-5375. http://dx.doi.org/10.1063/1.342525
[27] V. Gavriljuk, Acta Mater. 48 (2000) 3879- 3893. http://dx.doi.org/10.1016/S1359-6454(00)00192-0
[28] N.S. Stoloff and R.G. Davies, Prog. Mater. Sci. 13 (1968) 1-84. http://dx.doi.org/10.1016/0079-6425(68)90018-2
[29] G. Inden, and W. Pitsch, Z. Metallkd. 62 (1971) 627-632.
[30] G. Inden, Acta Metallurgica 22 (1974) 945- 951. http://dx.doi.org/10.1016/0001-6160(74)90019-4
[31] K. Momma and F. Izumi, J. Appl. Crystallogr. 41 (2008) 653-658. http://dx.doi.org/10.1107/S0021889808012016
[32] P.R. Swann, L. Grånäs and B. Lehtinen, Metal Science 9 (1975) 90-96. http://dx.doi.org/10.1179/030634575790445279
[33] O. Kubaschewski, Iron-binary Phase Diagrams, Springer-Verlag, Berlin, 1982.
[34] E. Heikinheimo, A.A. Kodentsov and F.J.J. van Loo, Acta Metallurgica 38 (1998) 1229- 1235.
[35] G. Papadimitriou and J.M. Genin, Phys. Status Solidi A 9 (1972) K19-K23. http://dx.doi.org/10.1002/pssa.2210090152
[36] T. Ros, D. Ruiz, Y. Houbaert and R.E. Vandenberghe, J. Magn. Magn. Mater. 242- 245 (2002) 208-211.
[37] M.C.M. Farquhar, M.A. Lipson and A.R. Weil, J. Iron Steel Institute 152 (1946) 457-471.
[38] Y.F. Liang, J.P. Lin, F. Ye, Y.J. Li, Y.L. Wang and G.L. Chen, J. Alloy Compd. 504, (2010) S475- S479.
[39] K. Raviprasad, K. Aoki and K. Chattopadhyay, Mater. Sci. Eng. A 172 (1993) 125-135. http://dx.doi.org/10.1016/0921-5093(93)90432-E
[40] J.H. Yu, J.S. Shin, J.S. Bae, Z.H. Lee, T.D. Kee and H.M. Lee, Journal of Korean Institute of Metals and Materials 39 (2001) 394-398.
[41] K. Narita and M. Enokizono, IEEE T. Magn. 15 (1979) 911-915. http://dx.doi.org/10.1109/TMAG.1979.1060174
[42] I.N. Shabanova, V.I. Kormilets, L.D. Zagrebin and N.S. Terebova, J. Struct. Chem. 39 (1998) 1098-1102. http://dx.doi.org/10.1007/BF02903602
[43] E.G. Moroni, W. Wolf, J. Hafner and R. Podloucky, Phys. Rev. B 59 (1999) 860-871. http://dx.doi.org/10.1103/PhysRevB.59.12860
[44] A.I. Al-Sharif, M. Abu-Jafar and A. Qteish, Condens. Matter Phys. 13 (2001) 2807. http://dx.doi.org/10.1088/0953-8984/13/12/305
[45] K. Hilfrich, W. Kölker, W. Petry, O. Schärpf and E. Nembach, Scripta Metallurgica et Materialia 24 (1990) 39-44. http://dx.doi.org/10.1016/0956-716X(90)90563-V
[46] G. Inden and W. Pitsch, Z. Metallkd. 63 (1972) 253-258.
[47] H.H. Ettwig and W. Pepperhoff, Z. Metallkd. (1972) 453-456.
[48] G. Schlatte and W. Pitsch, Z. Metallkd. 67 (1976) 462-466.
[49] J. Lacaze and B. Sundman, Metallurgical Transactions A 22A (1991) 2211.
[50] L.D. Landau and E.M. Lifshitz, Física Estadística Vol. 5, Editorial Reverté, 1969.
[51] J.S. Shin, J.S. Bae, H.J. Kim, H.M. Lee, T.D. Lee, E.J. Lavernia and Z.H. Lee, Mater. Sci. Eng. A 407 (2005) 282-290. http://dx.doi.org/10.1016/j.msea.2005.07.012
[52] W.J. Yuan, R. Li, Q. Shen and L.M. Zhang, Mater. Charact. 58 (2007) 376 - 379. http://dx.doi.org/10.1016/j.matchar.2006.06.003
[53] T. Ros-Yanez, D. Ruiz, J. Barros, Y. Houbaert and R. Colas, Mater. Sci. Eng. A 447 (2007) 27-34 http://dx.doi.org/10.1016/j.msea.2006.10.075
[54] B. Fultz and J.M. Howe, Transmission Electron Microscopy and Diffractometry of Materials, 3rd Edition, Springer, 2008.
[55] N.V. Ershov, V.A. Lukshina, B.K. Sokolov, Y.P. Chernenkov and V.I. Fedorov, J. Magn. Magn. Mater. 300 (2006) 469-472. http://dx.doi.org/10.1016/j.jmmm.2005.10.196
[56] D. Ruiz, T. Ros-Ya-ez, G.J. Cuello, R. Vandenberghe and Y. Houbaert, Physica BCondensed Matter. 385 (2006) 578-580. http://dx.doi.org/10.1016/j.physb.2006.05.364
[57] M.D. Graef, Introduction to Conventional Transmission Electron Microscopy, Cambridge University Press, 2003. http://dx.doi.org/10.1017/CBO9780511615092
[58] M.J. Marcinkowski and N. Brown, Acta Metallurgica 9 (1961) 764-786. http://dx.doi.org/10.1016/0001-6160(61)90107-9
[59] A. Gemperle and J. Ko˘cik, Phys. Solid. State 19 (1967) 333. http://dx.doi.org/10.1002/pssb.19670190134
[60] A. Gemperle, Transactions of the Metallurgical Society of AIME 242 (1968) 2287.
[61] G. Lakso and M.J. Marcinkowski, Metallurgical Transactions 5 (1974) 839-845. http://dx.doi.org/10.1007/BF02643136
[62] T. Saburi and S. Nenno, Philos. Mag. 15 (1967) 813-824. http://dx.doi.org/10.1080/14786436708220929
[63] F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsevier Ltd, Oxford, 2004.
[64] L. Grånäs and B. Aronsson, Transactions of the Metallurgical Society of AIME 239 (1967) 1273-1274.
[65] G.E. Dieter, Mechanical Metallurgy, McGraw - Hill, 1988.
[66] F. Faudot, J.F. Rialland and J. Bigot, Phys. Scripta 39 (1989) 263-267. http://dx.doi.org/10.1088/0031-8949/39/2/013
[67] T. Ros-Yá-ez, D. Ruiz and J. Barros, Mater. Sci. Eng. A, 447 (2007) 27-34. http://dx.doi.org/10.1016/j.msea.2006.10.075
[68] J.M. Campillo and F. Plazaola, Defect Diffus. Forum 141 (2003) 213–215.
[69] D. Porter and K.E. Easterling, Phase Transformations in Metals and Alloys, CRC Press, 1992. http://dx.doi.org/10.1007/978-1-4899-3051-4
[70] F. González, K.M. Mostafa, R. Petrov, P.R. Calvillo, E.D. Grave, D. Segers and Y. Houbaert, Int. J. Mater. Res. 103 (2012) 1440-1443. http://dx.doi.org/10.3139/146.110793
[71] K.M. Mostafa, F. González Camara, R. Petrov, P. Rodriguez Calvillo, J. De Baerdemaeker, E. De Grave, D. Segers and Y. Houbaert, J. Appl. Phys. 151 (2011) 960-963.
[72] O.A. Lambri, J.I. Pérez-Landazábal, J.A. Cano and V. Recarte, Mater. Sci. Eng. A 370 (2004) 459-463. http://dx.doi.org/10.1016/j.msea.2003.06.006
[73] B. Viala, J. Degauque, M. Fagot, M. Baricco, E. Ferrara and F. Fiorillo, Mater. Sci. Eng. A 212 (1996) 62. http://dx.doi.org/10.1016/0921-5093(96)10188-X
[74] O.A. Lambri, J.I. Pérez-Landazábal, V. Recarte, G.J. Cuello and I.S. Golovin, J. Alloys Compd. 537 (2012) 117-122. http://dx.doi.org/10.1016/j.jallcom.2012.04.119
[75] K. Hilfrich, O. Schärpf and E. Nembach, J. Appl. Phys. 74 (4) (1993) 2354-2358. http://dx.doi.org/10.1063/1.354721
[76] F. Sorbello, P.E.J. Flewitt, G. Smith and A.G. Crocker, Acta Mater. 57 (2009) 2646-2656. http://dx.doi.org/10.1016/j.actamat.2009.02.011
[77] P.R. Calvillo, R. Petrov, Y. Houbaert and L. Kestens, Mater. Sci. Forum 550 (2007) 539. http://dx.doi.org/10.4028/www.scientific.net/MSF.550.539
[78] J. Prahl, A. Machová, M. Landa, P. Hausild, M. Karlík, A. Spielmannová, M. Clavel and P. Haghi-Ashtiani, Mater. Sci. Eng. A 462 (2007) 178-182. http://dx.doi.org/10.1016/j.msea.2006.02.456
[79] Y. Houbaert and J. Schneider, 3rd International Conference WMM'08, J. Schneider, Y. Houbaert and K. Verbeken (Eds.), Ghent, Belgium 2008.
[80] L.S. Darken, Trans. AIME 180 (1948) 430-438.
[81] H.V.M. Mirani and P. Maaskant, Phys. Status Solidi A14, 521 (1972) 521-525
[82] E. Heikinheimo, A.A. Kodentsov and F.J.J. van Loo, Scripta Mater. 38, 8 (1998) 1229-1235. http://dx.doi.org/10.1016/S1359-6462(98)00023-2
[83] E. Rabkin and W. Gust, Thermodymanics of Alloy Formation, Y. A. Chang, and F. Sommer, (Ed.), Minerals, Metals & Materials Soc, Warrendale, EE.UU., 1997, pp. 199-219.
[84] A. Nowick and B. Berry, Anelastic relaxation in crystalline solids, Academic Press, 1972.
[85] R. Schaller, G. Fantozzi and G. Gremaud (Eds.), Mechanical Spectroscopy 2001, Trans. Tech. Publications, Switzerland, 2001.
[86] F. González, D. Ruiz and Y. Houbaert, 11th International Conference of Imperfections Interaction and Anelastic Phenomena in Solids, Trans. Tech. Publications, Tula, Rusia, 2007, p. 8.
[87] M.S. Blanter, I.S. Golovin, H. Neuhäuser and H.-R. Sinning, Internal Friction in Metallic Materials, Springer Verlag, 2007.
[88] I.S. Golovin, H. Neuhäuser, H.-R. Sinning and C. Siemers, Intermetallics 18 (2010) 913-921. http://dx.doi.org/10.1016/j.intermet.2009.12.031
[89] D. Ruiz, J.L. Rivera-Tovar, D. Segers, R.E. Vandenberghe and Y. Houbaert, Mater. Sci. Eng. A 442 (2006) 462-465. http://dx.doi.org/10.1016/j.msea.2006.05.164
[90] F. Landgraf, M. Emura and M. Decampos, J. Magn. Magn. Mater. 320 (2008) e531-e534. http://dx.doi.org/10.1016/j.jmmm.2008.04.011
[91] G. Lyudkovsky and P.D. Southwick, Metallurgical Transactions A 17 A (1986) 1267-1275.
[92] S. Constantinides, 4th International Conference WMM'10, J. Schneider and R. Kawalla (Eds.), Ghent, Belgium 2010.
[93] G. Bertotti, IEEE T. Magn. 24 (1988) 621-630. http://dx.doi.org/10.1109/20.43994
[94] S. Paolinelli, M.A. Cunha, R. Takanohashi and A.M. Simões, 4th International Conference WMM'10, J. Schneider and R. Kawalla (Eds.), Ghent, Belgium 2010.
[95] M. Emura, F.J. Landgraf, W. Ross and J. Barreta, J. Magn. Magn. Mater. 254-255 (2003) 358- 360. http://dx.doi.org/10.1016/S0304-8853(02)00856-9
[96] R. Brajpuriya, P. Sharma, S. Jani, S. Kaimal, T. Shripathi, N. Lakshmi and K. Venugopalan, Appl. Surf. Sci. 257 (2010) 10-16. http://dx.doi.org/10.1016/j.apsusc.2010.06.008
[97] F.W. Glaser and W. Ivanick, Journal of Metals (1956) 1290-1295.
[98] W. Ciurzy ska, J. Zbroszczyk, J. Olszewski, J. Frackowiak and K. Narita, J. Magn. Magn. Mater. 133 (1994) 351-353.
[99] N.I. Kulikov, D. Fristot, J. Hugel and A.V. Postnikov, Phys. Rev. B 66 (2002) 1-8. http://dx.doi.org/10.1103/PhysRevB.66.014206
[100]S. Dennler and J. Hafner, Phys. Rev. B 73 (2006) 1-14. http://dx.doi.org/10.1103/PhysRevB.73.174303
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2013 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.