Constitutive equations of the hot flow behaviour of microalloyed steels
DOI:
https://doi.org/10.3989/revmetalm.1998.v34.iExtra.738Keywords:
Constitutive equations, Steels, Hot workingAbstract
Over centuries, the hot forming has been employed to provide shape to metáis. Nowadays, the deformation at high temperatures gives also the required final mechanical properties. From this point of view, the obtention of a constitutive equation describing the hot flow behaviour of microalloyed steels in particular is a very important task. The main difficulty in modelling the high temperature flow arises from the simultaneity of two opposite phenomena, namely, work hardening and dynamic softening due to recovery and recrystallization. In this is work a review of constitutive equations (including the effect of the chemical composition) describing the flow behaviour of microalloyed steels deformed under high temperature conditions.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1998 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.