Acoustic emission study on flexural behaviour of WC-Co coatings obtained by atmospheric plasma spray

Authors

  • F. Segovia Instituto de Tecnología de Materiales ITM. Universidad Politécnica de Valencia
  • E. Klyatskina Instituto de Tecnología de Materiales ITM. Universidad Politécnica de Valencia
  • V. Bonache Instituto de Tecnología de Materiales ITM. Universidad Politécnica de Valencia
  • M. D. Salvador Instituto de Tecnología de Materiales ITM. Universidad Politécnica de Valencia
  • E. Sanchez Instituto de Tecnología Cerámica ITC. Universidad Jaime I
  • V. Cantavella Instituto de Tecnología Cerámica ITC. Universidad Jaime I
  • C. Bloem Departamento de Tecnología y Diseño. Facultad de Ingeniería. Universidad de los Andes

DOI:

https://doi.org/10.3989/revmetalm.2007.v43.i6.84

Keywords:

Plasma spray coating, Nanomaterials, Cermet, Acoustic emissión, Fracture

Abstract


Plasma sprayed cermet coatings WC-Co are used in a wide range of industrial applications, mainly due to their wear resistance even in corrosive environments. The objective of this work is to analyze mechanical response of hard metal coatings by means of three- and four-points bend tests applying acoustic emission technique to determine failure critical strength. It has been observed the effect of supported charge level in structural damage by means of optical microscopy and scanning electron microscopy. Acoustic emission has allowed us to relate damage level to stresses level and then to understand coatings failure mechanism.

Downloads

Download data is not yet available.

References

[1] J.M. Miguel, J.M. Guilemany, B.G. Mellor Y Y.M. Xu, Mater. Sci. Eng. A352 (2003) 55-63. doi:10.1016/S0921-5093(02)00546-4

[2] D. Dalmas, S. Benmedakhene, C. Richard, A. Laksimi, G. Béranger Y T. Grégoire, Chim. Chem. 4 (2001) 345–350.

[3] C. Verdon, A. Karimi y J.L. Martin, Mater. Sci. Eng. A246 (1998) 11-24. doi:10.1016/S0921-5093(97)00759-4

[4] V. Higuera, F.J. Belzunce y S. Poveda, Rev. Metal. Madrid 40 (2004) 347-351.

[5] F.J. Belzunce, V. Higuera, y S. Poveda, Bol. Soc. Esp. Ceram. Vidrio 39 (2000) 333-336.

[6] M. Watanabe, A. Owada, S. Kuroda y Y. Gotoh, Surf. Coat. Technol. 201 (2006) 619-627. doi:10.1016/j.surfcoat.2005.12.019

[7] E. Celik, O. Culha, B. Uyulgan, N.F. Akazem, I. Ozdemir y A. Turk, Surf. Coat. Tech. 200 (2006) 4.320-4.328.

[8] J.M. Guilemany, S. Dosta y J.R. MigueL, Surf. Coat. Technol. 201 (2006) 1.180-1.190.

[9] J.A. Picas, A. Forn, R. Rilla Y E. Martin, Surf. Coat. Technol. 200 (2005) 1.178-1.181.

[10] J.A. Picas, A. Forn, R. Rilla y E. Martin, Rev. Metal. Madrid Vol. Extr. (2005) 197-201.

[11] G. Xie, X. Lin, K. Wang, X. Mo, D. Zhang y P. Lin, Corros. Sci. (2006) In press. doi:10.1016/j.corsci.2006.04.007

[12] Z.G. Ban y L.L. Shaw, Acta Mater. 49 (2001) 2.933-2.939.

[13] J. He y J.M. Schoenung, Mater. Sci. Eng. A336 (2002) 274–319. doi:10.1016/S0921-5093(01)01986-4

[14] A. Roques, M. Browne, J. Thompson, C. Rowland y A. Taylor, Biomater. 25 (2004) 769-778. doi:10.1016/S0142-9612(03)00581-7

PMid:14609665

[15] N.A. Semashenko, V.I. Shport, B.N. Marin, A.I. Pekarsh, V.I. Muravie y A.I. Evstigneev, Akysticheskaya Emissiya V Eksperimentalnom Materialovedenii, Ed. Mashinostroenie, Moscú, Rusia, 2002, pp. 9-16.

[16] E. Sánchez, V. Cantavella, M.D. Salvador, V. Bonache, V. Amigó, N. Valero y F. Sapiña, Actas IX Cong. Nac. Materiales, vol. 2, Vigo, España, 2006, p.1.199.

[17] P. Bansal, P. H. Shipway, S. B. Leen y L.C. Driver, Mater. Sci. Eng. A, 430 (2006) 104-112. doi:10.1016/j.msea.2006.05.139

[18] V. Higuera, F.J. Belzunce y J. RIBA, Rev. Metal. Madrid 42 (2006) 444-445.

[19] D. Tu, S. Chang, S. Chao y C. Lin, J. Vac. Sci. Technol. A3 (6) (2003) 2479-2482. doi:10.1116/1.572862

[20] Y. C. Zhu, C. X. Ding y P. Strutt, Ceram. Int. 27 (2001) 669-674. doi:10.1016/S0272-8842(01)00016-5

[21] M.F. Morks, Y. Gao, N.F. Fahim, F.U. Yingqing y M.A. Shoeib, Surf. Coat. Technol. 199 (2005) 66-71. doi:10.1016/j.surfcoat.2005.02.159

[22] M.E. Vinayo, F. Kassabji y J. Guyonne, J. Vac. Sci. Technol. A 3 (1985) 2.483-2.489.

[23] H. Li, K.A. Khor, L.G. Yu y P. Chang, Surf. Coat. Technol. 194 (2005) 96-102. doi:10.1016/j.surfcoat.2004.04.075

[24] J. He y J.M., Schoenung, Surf. Coat. Technol. 157 (2002) 72-79. doi:10.1016/S0257-8972(02)00141-X

[25] J.M. Guillemany, J. Nin, C. Lorenzana, J.M. Miguel Y J.R. Miguel, Bol. Soc. Ceram. Vidrio (2004) 483-487.

[26] M.P. Planche, H. Liao, B. Normand y C. Coddet, Surf. Coat. Technol. 200 (2005) 2.465-2.473.

[27] J.M. Guillemany, S. Dosta, J. Nin y J.R. Miguel, J. Thermal Spray Technol. 14 (2004) 405-413.

[28] Z.G. Ban y L.L. Shaw, J. Thermal Spray Technol. 12-1 (2003) 112-119.

[29] C.S. Richard, G. Beranger, J. Lu, J.F. Flavenot And T. Gregoire, Surf. Coat. Technol. 78 (1996) 284-294. doi:10.1016/0257-8972(95)02416-6

Downloads

Published

2007-12-30

How to Cite

Segovia, F., Klyatskina, E., Bonache, V., Salvador, M. D., Sanchez, E., Cantavella, V., & Bloem, C. (2007). Acoustic emission study on flexural behaviour of WC-Co coatings obtained by atmospheric plasma spray. Revista De Metalurgia, 43(6), 414–423. https://doi.org/10.3989/revmetalm.2007.v43.i6.84

Issue

Vol. 43 No. 6 (2007)

Section

Articles

License

Copyright (c) 2007 Consejo Superior de Investigaciones Científicas (CSIC)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.

Crossref
Scopus
Google Scholar
Europe PMC