Simulation of the hot flow behaviour of a médium carbón microalloyed steel. Part 2. Dynamic recrystallization: onset and kinetics
DOI:
https://doi.org/10.3989/revmetalm.1997.v33.i3.857Keywords:
Modelling, Dynamic recrystallization, Recrystallization kineticsAbstract
According to the part 1 of this work, in this second part the dynamic recrystallization of a commercial medium carbon microalloyed steel is characterized from the point of view of its onset and kinetics. For this purpose uniaxial hot compression tests were carried out over a range of five orders of magnitude in strain rate and 300 °C of temperature. Experimental results are compared with those reported in the literature and the possible effect of dynamic precipitation is also analyzed. It is verified that the kinetics of dynamic recrystallization can faithfully be described by the classical Avrami equation.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1997 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.