Study of the workability and room temperature straining behaviour of high silicon steel (4 wt% Si) by means of compression tests
DOI:
https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1009Keywords:
Mechanical properties, Twining, MicrostructureAbstract
Series of silicon alloys (from 3.3 to 6.3% wt Si) were produced to study their workability at room temperature. Cast samples, machined into cylinders, were compressed with a servohydraulic computer driven machine at a constant strain rate. The results supplied information about the strengthening, phenomena and confirmed that the workability decreases with the higher silicon content. In addition constitutive equations were fitted from the stress-strain data. Metallographic examination showed twins which density increased with the percentage of Si.
Downloads
Download data is not yet available.
Downloads
Published
2005-12-17
How to Cite
Barros, J., Ros-Yáñez, T., Colás, R., & Houbaert, Y. (2005). Study of the workability and room temperature straining behaviour of high silicon steel (4 wt% Si) by means of compression tests. Revista De Metalurgia, 41(Extra), 116–120. https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1009
Issue
Section
Articles
License
Copyright (c) 2005 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.