Study and modelling of the influence of second phase particles on the austenite grain growth in a niobium microalloyed steel

Authors

  • D. San Martín Fundamental of Advance Materials Group, Faculty of Aerospace Engineering
  • F. G. Caballero Grupo de Transformaciones de Fase en Estado Sólido de Aceros (MATERALIA) Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM)
  • C. Capdevila Grupo de Transformaciones de Fase en Estado Sólido de Aceros (MATERALIA) Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM)
  • C. García-de-Andrés Grupo de Transformaciones de Fase en Estado Sólido de Aceros (MATERALIA) Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM)

DOI:

https://doi.org/10.3989/revmetalm.2006.v42.i2.13

Keywords:

Austenite Grain grain growth, Nb microalloyed steel, Grain coarsening temperature, Modeling, Continuous heating

Abstract


The austenite grain growth occurred during continuous heating in a niobium microalloyed steel has been investigated in this work. The effect of temperature and heating rate on the grain size is studied. The free grain coarsening temperature is determined as a function of the heating rate. It is found that unpinning by precipitates occurs around 40-70K below the temperature of complete dissolution of carbonitrides. Furthermore, a new model has been proposed to describe the austenite grain coarsening under the influence of niobium carbonitrides during continuous heating at different rates.

Downloads

Download data is not yet available.

References

[1] H.V. Atkinson, Acta Metall. 36 (1988) 469- 491. doi:10.1016/0001-6160(88)90079-X

[2] N.T. Baker, Future Developments of Metals and Ceramics, Institute of Materials, J.A. Charles, G.W. Greenwood and G.C. Smith (Eds.), Londres, (Inglaterra), 1992, J.A. Charles, G.W. Greenwood and G.C. Smith (Eds.), pp. 75.

[3] T. Katajarinne, M. Somani, P. Karjalainem, Rev. Metal. Madrid 40 (2004) 329-334.

[4] S.F. Medina, M. Chapa, M. Gomez, A. Quispe, V. Lopez y B. Fernandez, Rev. Metal. Madrid 39 (2003) 408-417.

[5] T. Gladman y F. B. Pickering, J. Iron Steel Inst. 205 (1967) 653-664.

[6] R. Coladas, J. Masounave, G. Guerin y J.- P. Bailon, Met. Sci., November (1977) 509- 516.

[7] G.R. Speich, L. J. Cuddy, C.R. Gordon y A.J. Deardo, Phase Transformations in Ferrous Alloys, TMS-AIME, A. R. Marder and J. I. Goldstein (Eds.), Warrendale, PA, (EE.UU.) 1984, A. R. Marder and J. I. Goldstein (Eds.), pp. 341.

[8] L.J. Cuddy y J. C. Raley, Metall. Trans. A 14 (1983) 1.989-1.995.

[9] H. Ohtani, F. Terasaki y T. Kunitake, Trans. Iron Steel Inst. Jpn. 12 (1972) 118-127.

[10] N. J. Petch, J. Iron Steel Inst. 174 (1953) 25-28.

[11] A. Grange, Trans. Am. Soc. Met. 59 (1966) 26.

[12] S. Kim, S. Lee y B. S. Lee, Mater. Sci. Eng. A 359 (2003) 198-209. doi:10.1016/S0921-5093(03)00344-7

[13] J. Kusiak y R. Kuziak, J. Mater. Process. Technol. 127 (2002) 115-121. doi:10.1016/S0924-0136(02)00278-9

[14] A. Di Schino, M. Barteri y J.M. Kenny, J. Mater. Sci. 38 (2003) 4.725-4.733.

[15] W.B. Morrison, ASM Trans. 59 (1966) 824- 846.

[16] Y.M. Wanh, M.W. Chen, F.H. Zhou y E. Ma. Nature 419 (2002) 912-915. doi:10.1038/nature01133 PMid:12410306

[17] D. Witkin, Z. Lee, R. Rodriguez, S. Nutt y E. Lavernia. Scripta Scr. Mater. 49 (2003) 297-302.

[18] C. Zener, quoted by C. S. SMITH, Trans. AIME 175 (1948) 15-51.

[19] M. Hillert, Acta Metall. 13 (1965) 227-238. doi:10.1016/0001-6160(65)90200-2

[20] T. Gladman, Proceedings Proc.of the Royal R. Society Soc. 294A (1966) 298.

[21] N. A. Haroun y D. W. Budworth, J. Mater. Sci. 3 (1968) 326-328. doi:10.1007/BF00741970

[22] N. A. Haroun, J. Mater. Sci. 15 (1980) 2816. doi:10.1007/BF00550551

[23] P. Hellman y M. Hillert, Scand. J. Metall. 4 (1975) 211-219.

[24] N. Ryum, O. Hunderi y E. Nes, Scr. Metall. 17 (1983) 1.281-1.283.

[25] E. Nes, N. Ryum y O. Hunderi, Acta Metall. 33 (1985) 11-22. doi:10.1016/0001-6160(85)90214-7

[26] P.R. Rios, Acta Metall. 35 (1987) 2.805-2.814.

[27] Y. Ogino, Tetsu-to-Hagane 57 (1971) 533.

[28] N.E. Hannerz y F. de Kazinczy, J. Iron Steel Inst. 208 (1970) 475-481.

[29] F. C. Hull y W. J. Houk, J. Met. April (1953) 565-572

[30] C. Garcia-De-Andres, M. J. Bartolome, C. Capdevila, D. San Martin, F. G. Caballero, V. Lopez, Mater. Charact. 46 (2001) 389-398. doi:10.1016/S1044-5803(01)00142-5

[31] C. Garcia-De-Andres, F.G. Caballero, C. Capdevila, D. San Martin, Mater. Charact. 4 (2003) 121-127.

[32] G. R. Booker, J. Norbury, British Br. J. Appl. Phys. 8 (1957) 109. doi:10.1088/0508-3443/8/3/306

[33] C. P. Scott, D. Chaleix, P. Barges, V. Rebischung, Scr. Mater. 47 (2002) 845-849. doi:10.1016/S1359-6462(02)00219-1

[34] S. G. Hong, H. J. Jun, K. B. Kang, C. G. Park, Scr. Mater. 48 (2003) 1201-1206. doi:10.1016/S1359-6462(02)00567-5

[35] A. Fukami, Jeol News, July (1967) 5-7.

[36] J.E. Mancilla, C.A. Hernandez, Rev. Metal. Madrid 40 (2004) 188-192.

[37] F. Peñalba, C. Garcia-De-Andres, M. Carsi, F. Zapirain, J. of Mater. Sci. 31 (1996) 3.847-3.852.

[38] C. Garcia-De-Andres, C. Capdevila, F. G. Caballero, D. San Martin, J. Mater. Sci. 36 (2001) 565-571. doi:10.1023/A:1004895715744

[39] D. San Martin, Tesis Doctoral, Facultad de Ciencias Fisicas, Universidad Complutense of Madrid, 2003, pp.159.

[40] E.J. Palmiere, C.I. Garcia y A.J. Deardo, Metall. Mater. Trans. A 25 (1994) 277-286. doi:10.1007/BF02647973

[41] I.M. Lifshitz y V.V. Slyozov, J. Phys. Chem. Solids 19 (1961) 35-50. doi:10.1016/0022-3697(61)90054-3

[42] H. S. Zurob, C.R. Hutchinson, Y. Brechet y G. Purdy, Acta Mater. 50 (2002) 3075-3092. doi:10.1016/S1359-6454(02)00097-6

[43] B. Dutta, E. Valdes, C.M. Sellars, Acta Metall. Mater. 40 (1992) 653-662. doi:10.1016/0956-7151(92)90006-Z

[44] H. Davies, MTDATA, National Physical Laboratory, Teddington, (Inglaterra), 2003.

[45] T. Gladman, The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, Londres, (Inglaterra), 1997, pp.176.

Downloads

Published

2006-04-30

How to Cite

San Martín, D., Caballero, F. G., Capdevila, C., & García-de-Andrés, C. (2006). Study and modelling of the influence of second phase particles on the austenite grain growth in a niobium microalloyed steel. Revista De Metalurgia, 42(2), 128–137. https://doi.org/10.3989/revmetalm.2006.v42.i2.13

Issue

Vol. 42 No. 2 (2006)

Section

Articles

License

Copyright (c) 2006 Consejo Superior de Investigaciones Científicas (CSIC)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.

Crossref
Scopus
Google Scholar
Europe PMC

Most read articles by the same author(s)

1 2 > >>