Estudio mediante tres técnicas del módulo elástico de un material compuesto de Al(6061) con un alto contenido (40%vol) de SiC

R. Fernández; U. D. Hünicke; K. H. Mundt; P. Acosta; W. Kowalski; G. Schulz; G. González-Doncel

doi:10.3989/revmetalm.2001.v37.i2.500

Study by three techniques of the elastic response ofAI(6061) matrix composite material with a high content (40%vol) of SIC

Authors

R. Fernández Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM), C.S.I.C. Madrid
U. D. Hünicke Institut für Werkstoffkunde, Universitat Rostock
K. H. Mundt Institut für Werkstoffkunde, Universitat Rostock
P. Acosta Institut für Werkstoffkunde, Universitat Rostock
W. Kowalski Institut für Werkstoffkunde, Universitat Rostock
G. Schulz Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM), C.S.I.C. Madrid
G. González-Doncel Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas (CENIM), C.S.I.C. Madrid

DOI:

https://doi.org/10.3989/revmetalm.2001.v37.i2.500

Keywords:

Composite Materials, Elastic Behavior, Experimental Techniques,

Abstract

The purpose of this investigation is to study the elastic behavior of a discontinuously reinforced composite material, Al(6061)-40vol%SiC, by using three different procedures: Extensometry in uniaxial testing, pendulum elasticimeter, and propagation of acoustic signals in the material. The high ceramic content of this material provides it with a high stiffness without a significant increase in density. Because of this, the material is suitable as structural component in the automotive and aerospace industry.

Downloads

Download data is not yet available.

Downloads

Published

2001-04-30

How to Cite

Fernández, R., Hünicke, U. D., Mundt, K. H., Acosta, P., Kowalski, W., Schulz, G., & González-Doncel, G. (2001). Study by three techniques of the elastic response ofAI(6061) matrix composite material with a high content (40%vol) of SIC. Revista De Metalurgia, 37(2), 376–380. https://doi.org/10.3989/revmetalm.2001.v37.i2.500

Download Citation

Issue

Vol. 37 No. 2 (2001)

Section

Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.