Study by three techniques of the elastic response ofAI(6061) matrix composite material with a high content (40%vol) of SIC
DOI:
https://doi.org/10.3989/revmetalm.2001.v37.i2.500Keywords:
Composite Materials, Elastic Behavior, Experimental Techniques,Abstract
The purpose of this investigation is to study the elastic behavior of a discontinuously reinforced composite material, Al(6061)-40vol%SiC, by using three different procedures: Extensometry in uniaxial testing, pendulum elasticimeter, and propagation of acoustic signals in the material. The high ceramic content of this material provides it with a high stiffness without a significant increase in density. Because of this, the material is suitable as structural component in the automotive and aerospace industry.
Downloads
Download data is not yet available.
Downloads
Published
2001-04-30
How to Cite
Fernández, R., Hünicke, U. D., Mundt, K. H., Acosta, P., Kowalski, W., Schulz, G., & González-Doncel, G. (2001). Study by three techniques of the elastic response ofAI(6061) matrix composite material with a high content (40%vol) of SIC. Revista De Metalurgia, 37(2), 376–380. https://doi.org/10.3989/revmetalm.2001.v37.i2.500
Issue
Section
Articles
License
Copyright (c) 2001 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.