Fabrication and tribological properties of Al reinforced with carbon fibres
DOI:
https://doi.org/10.3989/revmetalm.2000.v36.i5.588Keywords:
Carbon Fibres, Metal matrix composites, Squeeze casting, Friction, Wear, TribofilmAbstract
The present work studies the manufacturing process of Al reinforced with Carbon Fibres (CF) by "Squeeze Casting", establishing the variables for obtaining an acceptable product with little Al4C3 at the interface. Friction and wear tests are performed and the necessary conditions for the formation of a tribofilm are established. The tests show an increasing resistance to abrasion due to their own wear mechanism. Certain design criteria for those components subjected to friction are recommended in order to maximise the mechanical performance of the tribological system.
Downloads
Download data is not yet available.
Downloads
Published
2000-10-30
How to Cite
Estrems Amestoy, M., Faura Mateu, F., & Froyen, L. (2000). Fabrication and tribological properties of Al reinforced with carbon fibres. Revista De Metalurgia, 36(5), 375–384. https://doi.org/10.3989/revmetalm.2000.v36.i5.588
Issue
Section
NO_SECCION_SI_RESUMEN
License
Copyright (c) 2000 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.