Coke quality comparison from samples obtained at different scales
DOI:
https://doi.org/10.3989/revmetalm.2005.v41.iExtra.995Keywords:
Blast furnace coke quality, Movable wall oven, Bulk density, Carbonization scaleAbstract
Coke cold mechanical strength measured by means of the IRSID test, reactivity towards CO2 (CRI) and post-reaction strength (CSR) are the most important parameters for controlling coke quality in Spain. INCAR was running a semi-industrial coking test plant until July of 1999. Previous to this closure, a comparison of the coke quality was made between the 6 t oven of this test plant and a 250 kg movable wall oven (MWO). It is thus possible to use the coke quality data obtained in the 250 kg MWO to predict coke quality at semi-industrial and industrial scales.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2005 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.