Liquid-liquid extraction of cadmium(II) by TIOACl (tri-iso-octylammonium chloride) ionic liquid and its application to a TIOACl impregnated carbon nanotubes system
DOI:
https://doi.org/10.3989/revmetalm.051Keywords:
Adsorption, Cadmium, Carbon nanotubes, Extraction, Hydrochloric acid, Ionic liquidAbstract
The extraction of cadmium(II) by the ionic liquid (R3NH+Cl-) (R: tri-iso-octyl) in Exxsol D100 from hydrochloric acid solution has been investigated. The extraction reaction is exothermic. The numerical analysis of metal distribution data suggests the formation of R3NH+CdCl3− and (R3NH+)2CdCl42− species in the organic phase. The results obtained for cadmium(II) distribution have been implemented in an impregnated multi-walled carbon nanotubes system. The influence of aqueous solution stirring speed (250–2000 min−1), adsorbent dosage (0.05–0.2 g) and temperature (20 °C–60 °C) on cadmium adsorption have been investigated.
Downloads
References
Alguacil, F.J., López-Delgado, A., Alonso, M., Sastre, A.M. (2004). The phosphine oxide Cyanex 921 and Cyanex 923 as carriers for facilitated transport of chromium(VI)-chloride aqueous solutions. Chemosphere 57 (8), 813–819. http://dx.doi.org/10.1016/j.chemosphere.2004.07.019 PMid:15488572
Alguacil, F.J., Cerpa, A., Lado, I., López, F.A. (2014). Technologies for the 21st century: carbon nanotubes as adsorbents of metals. Rev. Metal. 50 (3), e025. http://dx.doi.org/10.3989/revmetalm.025
Alonso, M., López-Delgado, A., Sastre, A.M., Alguacil, F.J. (2006). Kinetic modelling of the facilitated transport of cadmium(II) using Cyanex 923 as ionophore. Chem. Eng. J. 118 (3), 213–219. http://dx.doi.org/10.1016/j.cej.2006.02.006
Choi, S.-Y., Nguyen, V.T., Lee, J.-C., Kang, H., Panley, B.D. (2014). Liquid-liquid extraction of Cd(II) from pure and Ni/Cd acidic chloride media using Cyanex 921: A selective treatment of hazardous leachate of spent Ni-Cd batteries. J. Hazard. Mater. 278, 258–266. http://dx.doi.org/10.1016/j.jhazmat.2014.06.013 PMid:24981677
De Agreda, D., García-Díaz, I., López, F.A., Alguacil, F.J. (2011). Supported liquid membrane technologies in metals removal from liquid effluents. Rev. Metal. 47 (2), 146–168. http://dx.doi.org/10.3989/revmetalmadrid.1062
Jha, M.K., Kumar, V., Jeong, J., Lee, J.-C. (2012). Review on solvent extraction of cadmium from various solutions. Hydrometallurgy 111–112, 1–9. http://dx.doi.org/10.1016/j.hydromet.2011.09.001
Mubarak, N.M., Sahu, J.N., Abdullah, E.C., Jayakumar, N.S. (2014). Removal of heavy metals from wastewater using carbon nanotubes. Sep. Purif. Rev. 43 (4), 311–338. http://dx.doi.org/10.1080/15422119.2013.821996
Regel-Rosocka, M., Alguacil, F.J. (2013). Recent trends in metals extraction. Rev. Metal. 49 (4), 292–316. http://dx.doi.org/10.3989/revmetalm.1344
Salam, M.A., Al-Zhrani, G., Kosa, S.A. (2012). Simultaneous removal of copper(II), lead(II), zinc(II) and cadmium(II) from aqueous solutions by multi-walled carbon nanotubes. CR Chim. 15 (5), 398–408. http://dx.doi.org/10.1016/j.crci.2012.01.013
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
