Microstructure mechanical properties relationship in bainitic strurtures
DOI:
https://doi.org/10.3989/revmetalm.2005.v41.i5.225Keywords:
Bainite, EBSD, isothermal treatments, mechanical behaviourAbstract
In the present work, the microestructures and their mechanical properties have been studied in different bainitic structures. Therefore, different bainitic morphologies have been produced by isothermal treatments carried out at different temperatures. For these steels, 400-450 °C is the optimum range of temperatures in order to obtain bainitic structures. If the Temperature is higher, perlite is also formed and if it is lower, martensite is obtained during quenching. SEM and EBSD/OIM techniques were applied in order to study the microstructure. Tensile tests were carried out for mechanical characterization.
Downloads
Download data is not yet available.
Downloads
Published
2005-10-30
How to Cite
Altuna, M. A., & Gutiérrez, E. I. (2005). Microstructure mechanical properties relationship in bainitic strurtures. Revista De Metalurgia, 41(5), 357–364. https://doi.org/10.3989/revmetalm.2005.v41.i5.225
Issue
Section
Articles
License
Copyright (c) 2005 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
