Treatment of aluminium dust by aqueous dissolution
DOI:
https://doi.org/10.3989/revmetalm.2004.v40.i5.294Keywords:
Aluminium dust, hazardous residue, hydrolysis, evolved gases, reactivity.Abstract
Aluminium dust from aluminium remelting industry is a hazardous residue because of its high reactivity in the presence of water. In order to apply the new European Directive about landfill of waste, a study of its hydrolysis was carried out. The influence of temperature, time and pH on the hydrolysis of the aluminium dust was studied. The hydrolysed solids were characterized by XRD and AAS; in the aqueous solutions the pH and the ionic conductivity were determined. The evolved gases were analysed by mass spectrometry. The reactivity of the dust, before and after hydrolysis, was investigated by analysing the ammonia, hydrogen sulphide and metallic aluminium. By hydrolysis at 60 °C and 48 h a much lower reactive material was obtained which could be disposed with minimal environmental impact.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2004 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
