Effect of heating produced by welding on the microstructure and on the stress corrosion cracking susceptibility of AA7028 alloy
DOI:
https://doi.org/10.3989/revmetalm.1997.v33.i1.877Keywords:
Stress corrosion, Welding, Al-Zn-Mg alloysAbstract
The microstructural and stress corrosion cracking changes due to welding are studied for the AA7028 aluminium alloy. Special attention is paid to the characterization of what is known as the "white zone". The influence of the delay step between quenching and aging in a T73 treatment on the microstructure and on the characteristics of the heat-affected zone (HAZ) is also studied. Finally, the effect of thermal treatments applied on this zone after the welding is analyzed.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1997 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.