Study of the mechanical properties of low carbon content HSLA steels

Authors

  • S. Illescas Departament de Ciència dels Materials i Enginyeria Metal·lúrgica, Facultat de Química, Universitat de Barcelona
  • J. Fernández Departament de Ciència dels Materials i Enginyeria Metal·lúrgica, Facultat de Química, Universitat de Barcelona
  • J. Asensio Departamento de Ciencia de los Materiales e Ingeniería Metalúrgica, E.T.S. de Ingenieros de Minas, Universidad de Oviedo
  • M. Sánchez-Soto Departament de Ciència dels Materials i Enginyeria Metal·lúrgica, E.T.S.E. Industrial i Aeronàutica, Universitat Politècnica de Catalunya
  • J. M. Guilemany Departament de Ciència dels Materials i Enginyeria Metal·lúrgica, Facultat de Química, Universitat de Barcelona

DOI:

https://doi.org/10.3989/revmetalm.0902

Keywords:

HSLA steel, Microalloying, Bainite, Acicular ferrite, Mechanical properties

Abstract


Two high strength low alloy steels (HSLA) with the same bulk composition and slight microalloying content differences were studied. The main purpose of the study was to determine the effect of different heat treatments and the influence of vanadium (V) on the microstructure and mechanical properties of the bainite present in each steel. For that purpose, standard tests were conducted to determine the hardness, toughness, tensile and yield stress of the different bainite-acicular ferrite structures found in both steels. The results show how the V content promoted the formation of acicular ferrite, resulting in a decrease in hardness and tensile strength while improving toughness.

Downloads

Download data is not yet available.

References

[1] M.J. Balart, C.L. Davis and M. Strangwood, Mater. Sci. Eng. A328 (2002) 48-57. doi:10.1016/S0921-5093(01)01679-3

[2] C.I. Garcia, A.K. Lis, S.M. Pytel and A.J. Deardo, Ironmak. Steelmak. 18 (1991) 97-106.

[3] K. Hulka, F. Hesterkamp and L. Nachtel, Processing,Microstructure and Properties of HSLA Steels, TMS,Warrendale, 1988, pp. 153.

[4] J.P.Wang, Z.-G. Yang, B.Z. Bai and H.S. Fang, Mater. Sci. Eng. A 369 (2004) 112-118. doi:10.1016/j.msea.2003.10.304

[5] H.K.D.H Bhadeshia, Bainite in Steels, The Institute ofMaterials, 2nd ed, London, England, 2001.

[6] H.K.D.H. Bhadeshia and J.W. Christian,Metall. Trans. A 21 (1990) 767-797. doi:10.1007/BF02656561

[7] H.I. Aaronson Jr.,W.T. Reynolds, G.J. Shiflet and G. Spanos, Metall. Trans. A 21 (1990) 1343-1380. doi:10.1007/BF02672557

[8] M. Hillert, Scripta Mater. 47 (2002) 137-138. doi:10.1016/S1359-6462(02)00118-5

[9] Y. Ohmori, Y.C. Jung, K. Nakai and H. Shioiri, Acta Mater. 49 (2001) 3149-3162. doi:10.1016/S1359-6454(01)00234-8

[10] J.R. Yang and H.K.D.H. Bhadeshia,Mater. Sci. Technol. 5 (1989) 93-97.

[11] R.A. Ricks, P.R. Howell and G.S. Barrite, J. Mater. Sci. 17 (1982) 732-740. doi:10.1007/BF00540369

[12] I. Madariaga, I. Gutiérrez and H.K.D.H. Bhadeshia,Metall. Trans.A32 (2001) 2187-2197.

[13] H.I. Aaronson and C.Wells, Trans. AIME. 206 (1956) 1216-1223.

[14] E. Sarta Kumar-Menon and H.I. Aaronson, Acta Mater. 35 (1987) 549-563. doi:10.1016/0001-6160(87)90179-9

[15] F. J. Barbaro, P. Kraulis and K. E. Easterling, Mater. Sci. Technol. 5 (1989) 1057-1068.

[16] R. A. Farrar, Z. Zhang, S. R. Bannister and G. S. Barritte, J.Mater. Sci. 28 (1993) 1385-1390. doi:10.1007/BF01191982

[17] Z. Zhang and R. A. Farrar, Mater. Sci. Technol. 12 (1996) 237-260.

[18] D. J. Abson and R. E. Dolby, Weld. Inst. Res. Bull. 19 (1987) 202-207.

[19] K. He and D. V. Edmonds, Mater. Sci. Technol. 1 (2002) 289-292. doi:10.1179/026708301225000743

[20] J.M. Gregg and H.K.D.H. Bhadeshia, Acta Mater 45 (1997) 739-748. doi:10.1016/S1359-6454(96)00187-5

[21] F. Ishikawa, T. Takahashi and T. Ochi, Metall. Mater. Trans. A 25 (1994) 929-936. doi:10.1007/BF02652268

[22] M. Díaz-Fuentes and I. Gutiérrez, Mater. Sci. Eng. A 363 (2003) 316-324. doi:10.1016/S0921-5093(03)00665-8

[23] T. Zhenghua and S. Stumpf,Mater. Charact. 59 (2008) 717-728 doi:10.1016/j.matchar.2007.06.001

[24] I. Madariaga and I. Gutiérrez, Acta Mater. 47 (1999) 951-960. doi:10.1016/S1359-6454(98)00388-7

[25] I.Madariaga and I. Gutiérrez and J.L. Romero, Metall. Trans. A 29 (1998) 1003-1015.

[26] J. Fernández, S. Illescas and J.M. Guilemany, Mater Lett. 61 (2006) 2389-2392. doi:10.1016/j.matlet.2006.09.021

[27] S. Illescas, J. Fernández and J.M. Guilemany, Rev. Met. Madrid 44 (2008) 39-51.

[28] S. Illescas, J. Fernández and J.M. Guilemany, Prakt. Metallogr. 44 (2007) 334-346.

[29] S.S. Babu and H.K.D.H. Bhadeshia, Mater. T. JIM 32 (1991) 679-688.

[30] N. Tsunekage, K. Kobayashi and H. Tsubakino, Mater. Sci. Technol. 17 (2001) 847-855.

Downloads

Published

2009-12-30

How to Cite

Illescas, S., Fernández, J., Asensio, J., Sánchez-Soto, M., & Guilemany, J. M. (2009). Study of the mechanical properties of low carbon content HSLA steels. Revista De Metalurgia, 45(6), 424–431. https://doi.org/10.3989/revmetalm.0902

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>