Evolution of mechanical properties with temperature in amorphous Mg10Ni10Y ribbons

Authors

  • M. A. Torrijos Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas, CSIC
  • G. Garcés Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas, CSIC
  • J. García-Barriocanal Departamento de Física Aplicada. Facultad de Ciencias Físicas, UCM.
  • P. Pérez Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas, CSIC
  • P. Adeva Departamento de Metalurgia Física, Centro Nacional de Investigaciones Metalúrgicas, CSIC

DOI:

https://doi.org/10.3989/revmetalm.2006.v42.i1.4

Keywords:

Metallic glasses, Magnesium alloys, Mechanical behaviour

Abstract


The mechanical behaviour by tensile strength test from room temperature to 350 ºC in the rapidly solidified Mg-10Ni-10Y (at. %) ribbon has been studied. To determine the effect of yttrium additions the results are compared with those of Mg-11Ni studied in a previous work. Before studding the mechanical behavior of the material the thermal stability of the amorphous ribbon and the crystallization reactions were determined by DSC experiments. Results show that yttrium stabilizes the amorphous phase but it has not reinforcement effect. The tensile strength and elongation to failure values of the ternary alloy are lower than those of Mg-11Ni

Downloads

Download data is not yet available.

References

[1] M. Suzuki, R Inoue, M. Sugihara, H. Sato, J. Koike, K. Maruyama Y H. Oikawa, Mater. Sci. Forum. 350-351 (2000) 151-156.

[2] S. G. Kim, A. Inoue Y T. Masumoto. Mater. Trans. JIM 31 (1990) 929-934.

[3] T. Spassov Y U. Köster, Z. Metallkd. 91 (2000) 675-679.

[4] A.T.W. Kempen, H. Nitsche, F. Sommer Y E.J.Mittemeijer, Metall. Trans. 33 A (2002) 1.041-1.050.

[5] T. Spassov, P. Solsona, S. Surinach, M.D. Baró, J. Alloy. Comp. 345 (2002) 123-129. doi:10.1016/S0925-8388(02)00286-4

[6] P. Pérez, G. Garcés, G. Caruana Y P. Adeva, Rev. Metal. Madrid. Vol. Extr. (2005) 244-245.

[7] V. Rangelova Y T. Spassov, J. Alloy. Comp. 345 (2002) 148- 154.

[8] D. V. Louzguine, Larissa V. Louzguina Y Akihisa. Inoue, Phil. Mag, 83 (2003) 203-216 doi:10.1080/0141861021000032687

[9] K. Tanaka, Y. Kanda, M. Furuhashi, K. Saito, K. Kuroda Y H. Saka, J. Alloy Comp. 293-295 (199)521-525.

[10] N. Cui, P. He And J.L. Luo, Acta Mater. 47 (1999) 3.737-3.743.

[11] G. Liang. J. Alloy Comp. 370 (2004) 123-128. doi:10.1016/j.jallcom.2003.09.031

[12] P. Pérez, G. Garcés AND P. Adeva, J. Alloy Comp. 381 (2004)114-123. doi:10.1016/j.jallcom.2004.02.050

[13] W. Lorimer, Proc. Magnesium Technology, The Institute of Metals, London, 1986, pp. 47-53.

[14] W. Unsworth Y J. F. King, Proc. Magnesium Technology, The Institute of Metals, London, 1986, pp. 25-29.

[15] T. B. Massaski, J.L Murray, L. H. Bennet Y H. Backer, Binary Alloy Phases Diagrams, American Society for Metals (1986) pp. 1.559-1.562.

[16] T.R. Anantharaman, Metallic glasses. Production, Properties and Applications. Trans Tech Publications (1984) pp.213-216.

[17] C. Pampillo, J. Mater. Sci. 10 (1975) 1.194- 1.227.

[18] Liebermann, Howard H. Rapidly Solidified Alloys. Processes, structures, properties, Applications. Ed. Marcel Decker (1993).

Downloads

Published

2006-02-28

How to Cite

Torrijos, M. A., Garcés, G., García-Barriocanal, J., Pérez, P., & Adeva, P. (2006). Evolution of mechanical properties with temperature in amorphous Mg10Ni10Y ribbons. Revista De Metalurgia, 42(1), 32–40. https://doi.org/10.3989/revmetalm.2006.v42.i1.4

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>